E35Z

The new Bobcat® E35z, a new generation model in the popular 3.5 tonne machine class offers the additional benefits of ZHS design. This excavator provides the best possible mix of compactness, a large operating range for the workgroup (especially with the optional long arm), great stability (two counterweight options available) and a large and comfortable operator area. This machine tops out the R-Series range and will be appreciated by customers with a need for a high specification ZHS model, whilst preferring the lower cost of ownership compared to higher tonnage machines.

Category:
Operating weight with cab and bucket (ISO 6016) 3,499 kg
Transport mass (no attachment) 3,335 kg
Weight reduction with canopy -118 kg
Additional weight for cab with HVAC 19 kg
Additional weight for steel tracks 96 kg
Additional weight for long dipperstick (with heavy ctw.) 303 kg
Ground pressure with rubber tracks 31.8 kPa
Bucket pivot angle 185 °
Maximum reach of working equipment 5,351 mm
Maximum reach of working equipment, long dipperstick 5,633 mm
Maximum reach at ground level 5,230 mm
Maximum reach at ground level, long dipperstick 5,520 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted 2,267 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick 2,324 mm
Maximum blade height 382 mm
Maximum blade depth 456 mm
Maximum height of working equipment with dipperstick retracted 3,708 mm
Maximum bucket tooth height 4,804 mm
Maximum bucket tooth height, long dipperstick 4,985 mm
Maximum dump height 3,340 mm
Maximum dump height, long dipperstick 3,521 mm
Maximum depth of vertical wall which can be excavated 2,136 mm
Maximum depth of vertical wall which can be excavated, long dipperstick 2,414 mm
Maximum digging depth 3,117 mm
Maximum digging depth, long dipperstick 3,417 mm
Blade height 322 mm
Clearance, upper structure to ground line 540 mm
Ground line to top of engine cover 1,557 mm
Length of track on ground 1,647 mm
Machine centre line to blade 1,528 mm
Minimum radius in travel position 3,787 mm
Overall length of track assembly 2,074 mm
Overall length in travel position 4,823 mm
Overall length in travel position, long dipperstick 4,832 mm
Track lug height 25 mm
Blade width 1,750 mm
Height 2,468 mm
Track width 300 mm
Machine centre line to working equipment centre line, left-hand rotation 575 mm
Machine centre line to working equipment centre line, right-hand rotation 795 mm
Minimum turning radius 1,788 mm
Swing clearance, rear 875 mm
Swing clearance, rear, long dipperstick (with heavy counterweight) 965 mm
Working width at maximum right-hand rotation 1,841 mm
Working width at maximum left-hand rotation 1,805 mm
Make / model Kubota / D1703-M-D1-E4B-BC-2
Fuel Diesel
Number of cylinders 3
Displacement 1,642 cm3
Maximum power @ 2200 rpm (ISO 14396) 18.2 kW
Maximum torque (SAE) 97.4 Nm
Digging force, dipperstick (ISO 6015) 20,790 N
Digging force, long dipperstick (ISO 6015) 18,010 N
Digging force, bucket (ISO 6015) 33,430 N
Drawbar pull 34,132 N
Travel speed, low range 2.6 km/h
Travel speed, high range 4.7 km/h
Total hydraulic capacity 101.2 L/min
Auxiliary flow 63.9 L/min
Auxiliary relief 206.0 bar
Boom swing, left 75 °
Boom swing, right 55 °
Slew rate 8.6 RPM
Cooling system 8 L
Engine lubrication plus oil filter 5.2 L
Fuel reservoir 52 L
Hydraulic reservoir 8.3 L
Hydraulic system 39.7 L
Noise level LpA(EU Directive 2006/42/EC) 77 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 94 dB(A)
Whole body vibration (ISO 2631–1) 0.1 ms-2
Hand-arm vibration (ISO 5349–1) 0.3 ms-2