E26
The new generation of the popular Bobcat® E26 compact excavator (mini excavator) is an easy-to-use, robust machine optimized for specific rental industry needs while introducing the next level of operator comfort and features required by demanding owner operators. The new E26 excavator has a transport weight reduced by 100 kg but increased over-the-side lifting capacity. To overcome a common issue in the rental market and thus protect the uptime, the E26 is now equipped with extra innovative features such as the Cylinder-Inside-Boom (CIB) workgroup and its geometry, increasing protection against bucket collision with the cab.
Weights
| Operating weight | 2,608 kg |
| Additional weight for cab with heating | 2,477 kg |
| Additional weight for cab with HVAC | -118 kg |
| Ground pressure with rubber tracks | 28.9 kPa |
Working Range
| Bucket pivot angle | 185 ° |
| Maximum reach of working equipment | 4,678 mm |
| Maximum reach of working equipment, long dipperstick | 4,966 mm |
| Maximum reach at ground level | 4,553 mm |
| Maximum reach at ground level, long dipperstick | 4,850 mm |
| Maximum working equipment radius with boom at maximum height and dipperstick fully retracted | 2,132 mm |
| Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick | 2,135 mm |
| Maximum blade height | 385 mm |
| Maximum blade depth | 315 mm |
| Maximum height of working equipment with dipperstick retracted | 3,246 mm |
| Maximum bucket tooth height | 4,272 mm |
| Maximum bucket tooth height, long dipperstick | 4,473 mm |
| Maximum dump height | 3,057 mm |
| Maximum dump height, long dipperstick | 3,258 mm |
| Maximum depth of vertical wall which can be excavated | 1,809 mm |
| Maximum depth of vertical wall which can be excavated, long dipperstick | 2,078 mm |
| Maximum digging depth | 2,582 mm |
| Maximum digging depth, long dipperstick | 2,890 mm |
Dimensions
| Blade height | 319 mm |
| Clearance, upper structure to ground line | 539 mm |
| Ground line to top of engine cover | 1,540 mm |
| Length of track on ground | 1,543 mm |
| Machine centre line to blade | 1,462 mm |
| Minimum radius in travel position | 3,192 mm |
| Overall length of track assembly | 1,965 mm |
| Overall length in travel position | 4,174 mm |
| Track lug height | 21 mm |
| Blade width | 1,500 mm |
| Height | 2,438 mm |
| Track width | 250 mm |
| Machine centre line to working equipment centre line, left-hand rotation | 580 mm |
| Machine centre line to working equipment centre line, right-hand rotation | 705 mm |
| Minimum turning radius | 1,755 mm |
| Swing clearance, rear | 820 mm |
| Swing clearance, rear (zero tail swing), long dipperstick | 840 mm |
| Working width at maximum right-hand rotation | 1,741 mm |
| Working width at maximum left-hand rotation | 1,616 mm |
Engine
| Make / model | Kubota / D1105-E4B-BCZ-1 |
| Fuel | Diesel |
| Number of cylinders | 3 |
| Displacement | 1,123 cm3 |
| Maximum NET power (ISO 9249) | 15.4 kW |
| Maximum NET torque (ISO 9249) | 71.2 Nm |
Performance
| Digging force, dipperstick (ISO 6015) | 15,690 N |
| Digging force, bucket (ISO 6015) | 23,720 N |
| Drawbar pull | 29,080 N |
| Travel speed, low range | 2.5 km/h |
| Travel speed, high range | 4.3 km/h |
Hydraulic System
| Pump type | Dual outlet variable displacement piston pump with gear pumps |
| Piston pump capacity | 87 L/min |
| Auxiliary flow | 50 L/min |
| System relief pressure for auxiliary circuits | 180 bar |
Slew System
| Boom swing, left | 60 ° |
| Boom swing, right | 60 ° |
| Slew rate | 9.3 RPM |
Fluid Capacities
| Cooling system | 4.3 L |
| Engine lubrication plus oil filter | 3.6 L |
| Fuel reservoir | 34.4 L |
| Hydraulic reservoir | 10.2 L |
| Hydraulic system | 23 L |
Environmental
| Noise level LpA(EU Directive 2006/42/EC) | 80 dB(A) |
| Noise level LWA(EU Directive 2000/14/EC) | 93 dB(A) |
| Whole body vibration (ISO 2631–1) | 0.1 ms-2 |
| Hand-arm vibration (ISO 5349–1) | 0.5 ms-2 |