E08

With a retracted track width of only 71 cm, the Bobcat® E08 compact excavator (mini excavator) can access difficult and cramped jobsites where exhausting manual labour is your only other option. This model navigates through narrower openings and can operate in more confined areas than other excavators. The reduced tail swing gives you the flexibility to pivot and deposit soil while offering protection against accidental contact with surrounding objects.

Category:
Operating weight with TOPS canopy and bucket (ISO 6016) 1,138 kg
Transport mass (no attachment) 1,039 kg
Ground pressure with rubber tracks 28.8 kPa
Bucket pivot angle 196 °
Maximum reach of working equipment 3,145 mm
Maximum reach at ground level 3,093 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted 1,374 mm
Maximum blade height 196 mm
Maximum blade depth 230 mm
Maximum height of working equipment with dipperstick retracted 1,899 mm
Maximum bucket tooth height 2,685 mm
Maximum dump height 1,818 mm
Maximum depth of vertical wall which can be excavated 1,383 mm
Maximum digging depth 1,820 mm
Blade height 220 mm
Clearance, upper structure to ground line 363 mm
Ground line to top of engine cover 992 mm
Length of track on ground 968 mm
Machine centre line to blade 987 mm
Minimum radius in travel position 2,153 mm
Overall length of track assembly 1,280 mm
Overall length in travel position 2,793 mm
Track lug height 16 mm
Blade width 710 mm
Blade width (extensions extended) 1,000 mm
Height 2,209 mm
Track width 180 mm
Machine centre line to working equipment centre line, left-hand rotation 413 mm
Machine centre line to working equipment centre line, right-hand rotation 471 mm
Minimum turning radius 471 mm
Minimum turning radius 1,121 mm
Swing clearance, rear 550 mm
Working width at maximum right-hand rotation 1,220 mm
Working width at maximum left-hand rotation 1,163 mm
Make / model Kubota / D722-E4B-BCZ-6
Fuel Diesel
Number of cylinders 3
Displacement 0.7 L
Maximum power @ 2000 rpm (ISO 14396) 7.5 kW
Maximum torque (SAE) 40.1 Nm
Digging force, dipperstick (ISO 6015) 5,550 N
Digging force, bucket (ISO 6015) 8,294 N
Drawbar pull 9,905 N
Travel speed, low range 2.1 km/h
Pump type Double gear pump
Pump capacity 20 L/min
Auxiliary flow 20 L/min
Auxiliary relief 185.0 bar
Boom swing, left 67 °
Boom swing, right 64 °
Slew rate 9 RPM
Cooling system 3 L
Engine lubrication plus oil filter 3.5 L
Fuel reservoir 16 L
Hydraulic reservoir 2.6 L
Hydraulic system 9.4 L
Noise level LpA(EU Directive 2006/42/EC) 80 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 93 dB(A)