CC900 Plus

The Dynapac CC900 is a member of the small asphalt roller family. With a drum width of 900 mm it’s primarily used for small-scale compaction work such as pavements, cycle paths, small roads and small parking areas. The large drum diameter and drive motors connected in series contributes to excellent accessibility and hill-climbing capacity. Propulsion and vibration naturally come as standard on both drums.

Primarily used for small-scale compaction work such as pavements, cycle paths, small roads and small parking areas – places that need compaction but are difficult to reach with a larger roller.

These small tandem rollers come with an operating mass of approximately 1.6 tons and drum widths of 800, 900 and 1000 mm.

Category:
Max. operating mass 1665 kg
Operating mass (incl. ROPS) 1600 kg
Module mass (front/rear) 750 kg/ 850 kg
Speed range 0-9 km/h
Vertical oscillation ±13°
Theor. gradeability %
Centrifugal force 17 kN
Nominal amplitude 0.4 mm
Static linear load (front/rear) 8.3/ 9.4 kg/cm
Vibration frequency 70 Hz
Water tank 190 l
Manufacturer/Model Kubota D1105-E4B T4f/V
Type Water cooled diesel
Rated power, SAE J1995 18 kW (24 hp ) @ 2800 rpm
Fuel tank capacity 23 l
Driving Axial piston pump with variable displacement and servo. 2 radial piston motors with constant displacement.
Vibration Gear pump/motors with constant displacement.
Steering Gear pump with constant displacement.
Service brake Hydrostatic in forward and reverse lever.
Parking/ Emergency brake Failsafe brake in both drums.
Wheelbase 1350 mm
Width 970 mm
Curb clearance 465 mm
Drum diameter 584 mm
Height, with ROPS/cab 2300 mm
Ground clearance 255 mm
Length 2040 mm
Overhang, right 35 mm
Overhang, left 35 mm
Turning radius, outside 2810 mm
Turning radius, inside
Drum shell thickness 13 mm
Drum width 900 mm
Steering angle ±34°