The vertical-lift-path T76 compact  loader, part of the revolutionary R-Series loader lineup, has been completely redesigned to meet the growing demands of today’s toughest jobsites. The 74 HP loader – sometimes referred to as a skid-steer with tracks – boasts an inline engine and direct-drive system as well as cast-steel lift arms and an optimized lift arm linkage to increase lift height and capacity. The loader’s low ground pressure track system gives operators the ability to push through soft, sandy, wet or muddy conditions. You’ll notice powerful hydraulics and breakout forces, fast cycle times and an emphasis on operator comfort with optional automatic heat and air conditioning, ergonomic controls and a roomy cab. The advanced 5-Link torsion suspension undercarriage – another option on R-Series loaders – provides a more comfortable ride on long working days while enhanced features make servicing the machine even easier. The T76 is optimized to deliver more usable horsepower and better overall performance so you can complete bigger jobs in less time

Rated operating capacity (ISO 14397–1) 1,426 kg
Tipping load (ISO 14397-1) 4,050 kg
Pump capacity 88.1 L/min
Pump capacity (with high flow option) 114.7 L/min
System relief at quick couplers 23.8-24.5 MPa
Max. travel speed (high range – optional) 14.8 km/h
Make / Model Bobcat 2.4L, 97/68 EC Stage V
Fuel Diesel
Cooling Liquid
Power (SAE J1995 ) at 2600 RPM: 54.5 kW
Torque at 1800 RPM (SAE J1995 Gross): 283.9 Nm
Number of cylinders 4
Displacement 2,400 cm3
Fuel tank 120 L
Operating weight 5,051 kg
Shipping weight 4,394 kg
Ground pressure 43 kPa
Operating height 4,251.8 mm
Height with operator cab 2,078.7 mm
Angle of departure 27 °
Ground clearance 234.5 mm
Ground contact length 1,504.9 mm
Length without attachment 2,893.8 mm
Length with standard bucket 3,736.6 mm
Rollback at ground position 30 °
Dump height with standard bucket 2,526.1 mm
Height to bucket hinge pin 3,258.5 mm
Dump reach at maximum height 1,014 mm
Dump angle at maximum height 37 °
Rollback fully raised at maximum height 94 °
Width with standard bucket 2,032 mm
Turning radius with standard bucket 2,300.5 mm
Track, 450 mm tracks 1,531.1 mm
Width over tracks, 450 mm tracks 1,981.1 mm
Vehicle steering Direction and speed controlled by Selectable Joystick Controls (SJC
Loader hydraulics tilt and lift Selectable Joystick Controls (SJC)
Front auxiliary (standard) Proportional switch on Selectable Joystick Controls (SJC)
Transmission Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic motors
Operator LpA (98/37 & 474-1) 78 dB(A)
Noise level LWA (EU Directive 2000/14/EC) 103 dB(A)
Whole body vibration (ISO 2631–1) 0.7 ms-2
Whole body vibration (ISO 2631-1) uncertainty 0.4 ms-2
Hand-arm vibration (ISO 5349–1) 1.8 ms-2