E62

The Bobcat E62 is a zero tail-swing design compact excavator with an operating weight of 6.2 tonne. This model features an extra large cab, offering great operator comfort in terms of environment, leg room and visibility.To accommodate customer requirements, this model offers optional steel tracks, blade cylinder load holding valve and third auxiliary hydraulic lines. The long arm option paired with the additional counterweight maximises dig depth, reach and dump height clearance.

Category:
Operating weight 6,130 kg
Additional weight for steel tracks 206 kg
Additional weight for long dipperstick 127 kg
Ground pressure with rubber tracks 34.4 kPa
Bucket pivot angle 179 °
Maximum reach of working equipment 6,230 mm
Maximum reach of working equipment, long dipperstick 6,525 mm
Maximum reach at ground level 6,100 mm
Maximum reach at ground level, long dipperstick 6,400 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted 2,530 mm
Maximum working equipment radius with boom at maximum height and dipperstick fully retracted, long dipperstick 2,645 mm
Maximum blade height 460 mm
Maximum blade depth 440 mm
Maximum height of working equipment with dipperstick retracted 4,381 mm
Maximum bucket tooth height 5,785 mm
Maximum bucket tooth height, long dipperstick 6,005 mm
Maximum dump height 4,045 mm
Maximum dump height, long dipperstick 4,260 mm
Maximum depth of vertical wall which can be excavated 3,125 mm
Maximum depth of vertical wall which can be excavated, long dipperstick 3,435 mm
Maximum digging depth 3,815 mm
Maximum digging depth, long dipperstick 4,115 mm
Blade height 410 mm
Clearance, upper structure to ground line 635 mm
Ground line to top of engine cover 1,620 mm
Length of track on ground 1,990 mm
Machine centre line to blade 1,870 mm
Minimum radius in travel position 4,400 mm
Overall length of track assembly 2,500 mm
Overall length in travel position 5,670 mm
Overall length in travel position, long dipperstick 5,669 mm
Track lug height 21 mm
Blade width 1,980 mm
Height 2,550 mm
Track width 400 mm
Machine centre line to working equipment centre line, left-hand rotation 605 mm
Machine centre line to working equipment centre line, right-hand rotation 829 mm
Minimum turning radius 2,530 mm
Swing clearance, rear 1,100 mm
Working width at maximum right-hand rotation 2,147 mm
Make / model Yanmar / 4TNV94L-ZXSDB
Fuel Diesel
Number of cylinders 4
Displacement 3,054 cm3
Maximum NET power (ISO 9249) 36.2 kW
Maximum NET torque (ISO 9249) 206 Nm
Digging force, dipperstick (ISO 6015) 29,300 N
Digging force, long dipperstick (ISO 6015) 26,200 N
Digging force, bucket (ISO 6015) 44,100 N
Drawbar pull 55,000 N
Travel speed, low range 2.7 km/h
Travel speed, high range 4.4 km/h
Pump type One engine-driven tandem axial piston pump
Pump capacity 132 L/min
Auxiliary flow 85 L/min
System relief pressure for auxiliary circuits 210 bar
Boom swing, left 70 °
Boom swing, right 50 °
Slew rate 9.6 RPM
Cooling system 10 L
Engine lubrication plus oil filter 10.2 L
Fuel reservoir 78 L
Hydraulic reservoir 65 L
Hydraulic system 111 L
Noise level LpA(EU Directive 2006/42/EC) 73 dB(A)
Noise level LWA(EU Directive 2000/14/EC) 97 dB(A)
Whole body vibration (ISO 2631–1) 0.4 ms-2
Hand-arm vibration (ISO 5349–1) 0.9 ms-2